Brocade Communications Systems WFT-2D User Manual page 1333

2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and select the Enabled check box.
4. Click Next to advance to the Events pane.
Selecting an event for an event action
To select an event for an event action, complete the following steps.
1. Select Monitor > Event Processing > Event Actions.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Click Next to advance to the Events pane.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 550 Event Actions dialog box
The Event Actions dialog box displays.
Enter a name and description for the event action and select the Enabled check box.
By default, the Events pane of the Add Event Action dialog box displays, shown in
Event action definitions
Figure
32
551.
1281