Brocade Communications Systems WFT-2D User Manual page 1297

9. To set configuration policy managers for the Management application
10. Click OK on the Add Monitor dialog box.
11. Click Close on the Configuration Policy Manager dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
a. Select the Check for redundant connections to attached fabrics check box to determine if
there are at least the minimum number of configured physical connections between the
host and the attached fabric.
The default is 2. For more information about this check and a fix for rule violations, refer to
"Host configuration policy managers"
b. Enter the minimum number of connections between the host and the attached fabric in
the Minimum Connections field.
The default is 2.
c. Select the Check for connections through two fabrics to each target LUN check box to
determine if there are redundant connections between the host group and the target LUN.
For more information about this check and a fix for rule violations, refer to
configuration policy managers"
d. Select the hosts to which you want to apply this policy in the Available Hosts list and click
the right arrow button.
NOTE
You can use the All Host target in the Available Hosts list for future provisioning. Select All
Hosts and click the right arrow button to apply this policy to all discovered hosts.
The selected hosts display in the Selected Hosts list.
the following steps.
FIGURE 533 Add Configuration Policy Manager dialog box, Management Checks tab
a. Select the Management Checks tab.
b. Select the Check to see if the server backup is enabled and working check box to
determine the following configurations:
•
Backup enabled for the Management application server.
•
Backup output directory is accessible and writable.
This policy only applies to scheduled backup, not manual (on demand) backup.
For more information about this check and a fix for rule violations, refer to
configuration policy manager"
The Configuration Policy Manager dialog box displays with the new configuration policy
manager in the Monitors list.
Adding a configuration policy manager
on page 1235.
on page 1235.
on page 1237.
31
"Host
(Figure 533), complete
"Management
1245