Brocade Communications Systems WFT-2D User Manual page 594

12
Port commissioning
3. Enter a file name for the server support save file in the File Name field.
4. Select the Include Database check box to include the database in the support save and
5. Select the Client SupportSave check box to run supportsave on the client.
6. Enter a file name for the client support save file in the File Name field.
7.
8. Click OK on the message.
542
The default file name is DCM-SS-Time_Stamp.
choose one of the following options.
•
Select the Partial (Excludes historical performance data and events) option to exclude
historical performance data and events from the database capture.
•
Select the Full option to capture the entire database.
Clear the Include Database check box to exclude the database in the support save.
The default file name is DCM-Client-SS-Time_Stamp.
Click OK on the SupportSave dialog box.
A progress message displays with a list of the steps to be performed:
•
Capturing client support save
•
Capturing logs and server data
•
Capturing partial/full database
•
Capturing data from the products
You cannot close the progress message and you cannot perform any other actions until the
SupportSave is complete.
The application generates separate master logs to show the status of the Server and Client
Support save collection.
You cannot change the destination directory for Server and Client support save. Here are the
default directories:
•
Server Support save location: Install_Home/support
•
Client Support save locations:
(Local client) User_Home/Management_Application_Name/localhost/support

(Remote client) User_Home/Management_Application_Name/Server IP/support

NOTE
Server support save initiated from the remote client is only available from a client installed on
the server. However, you can copy the server support save from the View Repository dialog box
(using the Save button) to the remote client location.
Brocade Network Advisor SAN User Manual
53-1003154-01