Duplicating A Zone Alias; Creating A Zone Configuration - Brocade Communications Systems WFT-2D User Manual

3. Select a fabric from the Zoning Scope list.
4. Select Alias from the Type list.
5. Right-click the zone alias you want to delete and select Delete.
6. Click Yes on the confirmation message.
7.

Duplicating a zone alias

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select Alias from the Type list.
5. Right-click the zone alias you want to duplicate and select Duplicate.
6. Edit the name.
7.

Creating a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Click New Configuration.
5. Enter a name for the zone configuration.
6. Press Enter.
Brocade Network Advisor SAN User Manual
53-1003154-01
The selected zone alias is deleted from the Alias list.
Click OK or Apply on the Zoning dialog box to save your changes.
The Zoning dialog box displays.
The duplicated zone alias displays in the Alias list (for example, <Zone_Alias>_Copy).
To edit the name, refer to
Click OK or Apply on the Zoning dialog box to save your changes.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
A new configuration displays in the Zone Configurations list.
For zone name requirements and limitations, refer to
page 888.
Depending on the characters included in the name you enter, a message may display informing
you the name contains characters that are not accepted by some switch vendors. Click OK and
enter a different name or accept the default name assigned to the zone. (For zone name
requirements and limitations, refer to
"Renaming a zone alias" on page 898.
"Zoning naming conventions"
Zoning configuration
"Zoning naming conventions"
on page 888.)
21
on
899