Brocade Communications Systems WFT-2D User Manual page 1263

Configuring Aggregated Flow template
The Aggregated Flow predefined template creates flow rows for all the ports in the storage array
with the source device and empty destination device details as shown in
FIGURE 522
Perfom the following steps, in the Add Flow Definition - Aggregated Flow dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
2. Continue from step 2 through step 6 in
Brocade Network Advisor SAN User Manual
53-1003154-01
Add Flow Definition - Aggregated Flow template dialog box
<portname>_<last 4 digits of the source device WWN>.
deploy the flow definition.
Predefined flow definition templates
"Configuring Static Flow template"
29
Figure 522.
on page 1209" to
1211