Editing A Lag - Brocade Communications Systems WFT-2D User Manual

5. When you have finished configuring the policies, apply the settings to the DCB port.
6. Click OK when you have finished modifying the DCB port parameters.
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected port or
9. Click Close to close the Deployment Status dialog box.

Editing a LAG

Use the following procedure to change members and policies in a link aggregation group (LAG).
1. Select Configure > DCB.
2. Select the link aggregation group (LAG) from the Products/Ports list.
3. Click Edit.
Brocade Network Advisor SAN User Manual
53-1003154-01
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog box.
The Deploy to Ports dialog box displays.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
ports.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The Edit LAG dialog box displays, as shown in
FIGURE 237
Edit LAG dialog box
DCB configuration
Figure 237.
16
617