Bulk Port Configuration - Brocade Communications Systems WFT-2D User Manual

Deleting a boot image from the repository
1. Select one or more boot images from the Boot Image File Name list on the Boot Image
2. Click Delete.
Backing up boot image files
You can back up the boot image files from the repository using the Options dialog box. Refer to
"Backup support"

Bulk port configuration

Use the Adapter Host Port Configuration dialog box to create and assign port-level configurations to
either a single or multiple adapter ports at a time. You can save up to 50 port-level configurations.
The Management application supports the following default port configurations, which you can
select and assign to one port or multiple ports. You cannot edit the default configurations, but you
can delete them.
•
•
•
•
NOTE
You cannot configure Bulk port configuration through Management Application for Emulex Adapters.
Brocade Network Advisor SAN User Manual
53-1003154-01
Repository dialog box.
The boot image is removed from the boot image repository.
on page 599 for instructions.
Default Port — The port property. The default value is Enabled.
Default FDFS — The Frame Data Field Size property. The default value is 2048.
Default QoS — The Quality of Service property. The default value is Enabled.
Default TRL — The Target Rate Limiting property. The default value is Enabled.
Bulk port configuration
15
583