2. Select a fabric from the Fabric list.
3. Select one of the following from the Show list to determine what ports to display:
4. Review the port information:
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 217
Port Auto Disable dialog box
An information message displays the number of block ports for the fabric, if any.
•
All Ports (default)
•
Disabled PAD Ports
•
Enabled PAD Ports
•
Blocked Ports
•
Products/Ports tree — Displays devices and associated ports. Also, displays a Warning icon
for blocked FC ports (displayed with the port icon). Click the plus sign (+) symbol to expand
the view to display the ports.
•
Port Auto Disable — Displays whether Port Auto Disable is currently enabled or disabled on
the device or port.
•
Port Block Status — Displays whether the port is currently blocked.
•
Loss of Sync — Whether the Loss of Sync event is enabled or disabled.
•
Loss of Signal — Whether the Loss of Signal event is enabled or disabled.
•
OLS — Whether the Offline Primitive Sequence event is enabled or disabled.
•
NOS — Whether the Not Operational Primitive Sequence event is enabled or disabled.
•
LIP — Whether the Loop Initialization Primitive Sequence event is enabled or disabled.
•
Port Type — Displays the port type.
12
Port Auto Disable
547