Creating A Member In A Zone - Brocade Communications Systems WFT-2D User Manual

21
Zoning configuration
9. Click OK or Apply to save your changes.

Creating a member in a zone

Use this procedure to add a member to a zone when the member is not listed in the Potential
Members list of the Zone DB tab.
For instructions to add a member to a zone when the member is listed in the Potential Members
list, refer to the procedure
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select one or more zones to which you want to add members in the Zones list. (Press SHIFT or
5. Click New Member.
6. Select an option from the Member Type list.
7.
8. Click OK to save your changes and close the Add Zone Member dialog box.
9. For offline zone databases only, complete the following steps to save the zone configuration
10. Click OK or Apply to save your changes.
892
Any zones or zone configurations you have changed are saved in the zone database.
"Adding members to a zone"
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
CTRL and click each zone name to select more than one zone.)
The Add Zone Member dialog box displays.
The fields in the dialog box vary based on the Member Type option you select.
Fill in the remaining fields in the dialog box.
Click the Help button for additional information on each field.
OR
Click Apply to save your changes and keep the Add Zone Member dialog box open so you can
add more new members. Repeat
to step 9 when appropriate.
into the switch from the offline zone database:
a. Select Save to Switch from the Zone DB Operation list.
b. Click Yes on the confirmation message.
The selected zone database is saved to the fabric without enabling a specific zone
configuration.
Any zones or zone configurations you have changed are saved in the zone database.
on page 891.
step 5 through step 8 as many times as needed, and proceed
Brocade Network Advisor SAN User Manual
53-1003154-01