Modifying A Boot Lun Zone - Brocade Communications Systems WFT-2D User Manual

21
Boot LUN zones
4. Launch the New Boot LUN Zone dialog box by performing one of the following options:
5. Select a host port WWN from the list or enter an offline WWN.
6. Select a storage port WWN from the list or enter an offline WWN.
7.
8. Click Generate.
9. Click OK or Apply to save your changes.
The Boot LUN zone is saved to the Active Zone DB. To activate the Boot LUN zone, you must move it
to a zone configuration and activate the configuration.

Modifying a Boot LUN zone

Only one Boot LUN zone can exist for a host port. If you want to change the target port or LUN
number, you must create a new Boot LUN zone and overwrite the existing zone.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the Boot LUN zone you want to modify in the Zones list and select New Boot LUN
5. Select a storage port WWN from the list or enter an offline WWN.
6. Enter a 16-digit hexadecimal LUN number in the LUN # field.
7.
8. Click OK or Apply to save your changes.
922
•
Select New Boot LUN Zone from the New Zone list.
•
Right-click a zone in the Zones list and select New Boot LUN Zone.
The New Boot LUN Zone dialog box displays. The scope of the dialog box is either the selected
fabric or the selected zone, depending on how you launch it.
You can click the ellipsis button to display and select the host port WWNs from a device tree
with host group.
You can click the ellipsis button to display and select the storage port WWNs from a device tree
with storage group.
Enter a 16-digit hexadecimal LUN number in the LUN # field.
The Boot LUN zone is generated and displayed in the Boot LUN Zone details area.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Zone.
The New Boot LUN Zone dialog box displays. You can modify the storage port WWN and LUN
number.
You can click the ellipsis button to display and select the storage port WWNs from a device tree
with storage group.
Click Generate.
Brocade Network Advisor SAN User Manual
53-1003154-01