Brocade Communications Systems WFT-2D User Manual page 1331

4. Enter a unique name for the syslog filter in the Filter Name field.
5. Enter a general description of the syslog filter in the Description field.
6. (Optional) For additional filtering, enter a text string using from 1 through 512 characters or
7.
8. Select the Forward Snort® Messages check box to turn on Snort message forwarding. Refer to
9. Select the SAN, IP, or Hosts tab. Depending on the tab selected, the products available to
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 549
Add Syslog Filter dialog box
wild card symbols in the Regular Expression field. The regular expression is used to describe a
pattern in text. You can use an asterisk (*) to indicate a wildcard, as in the following examples:
•
*cdef: Matches a message ending with cdef
•
abc*: Matches a message beginning with abc
•
*abc*: Matches a message that contains abc
Select a severity level from the Severity pulldown menu. The severity level can be one of the
following, and appear in descending order of severity.
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning (Default)
•
Notice
•
Info
•
Debug
Events with the selected severity and those with higher severity levels are forwarded.
For example, by default, Critical severity is selected. Therefore, events with Critical, Alert, and
Emergency severity levels are forwarded.
To have all traps forwarded, select Debug, the lowest severity level.
"Snort message forwarding"
which you can add a syslog filter display in the Available Products list.
on page 1280 for more information.
32
Syslogs
1279