Brocade Communications Systems WFT-2D User Manual page 430

8
SAN view management overview
2. Enter a name (128-character maximum) in the Name field and a description (126-character
3. Click the Fabrics tab.
4. In the Available Fabrics table, select the fabrics you want to include in the view and click the
5. Click the Hosts tab.
378
FIGURE 161
Create View dialog box - Fabrics tab
maximum) in the Description field for the view.
NOTE
You cannot use the name "View" or "View All" in the Name field.
NOTE
You cannot use an existing name in the Name field.
right arrow button to move your selections to the Selected Fabrics and Hosts table.
The Available Fabrics table displays the names and the number of products in the available
fabrics. If this table is blank, it may be because all fabrics have been selected and are
displayed in the Selected Fabrics and Hosts table.
To select more than one row, press CTRL and click individual rows. To select multiple
sequential rows, press SHIFT and click on a sequence of rows.
FIGURE 162
Create View dialog box - Hosts tab
Brocade Network Advisor SAN User Manual
53-1003154-01