Brocade Communications Systems WFT-2D User Manual page 718

17
Security configuration deployment
10. Choose one of the following options to configure the frequency at which deployment runs for
11. Click OK on the Schedule Properties dialog box.
12. Select one or more ports or products to which you want to deploy the configuration in the
13. Click OK on the Deploy to Products - Layer 2 ACL dialog box.
Configuring a one-time deployment schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Click the Date list to select a date from the calendar.
Configuring an hourly deployment schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
666
the schedule:
•
To configure deployment to run only once, refer to
schedule" on page 666.
•
To configure hourly deployment, refer to
page 666.
•
To configure daily deployment, refer to
page 667.
•
To configure weekly deployment, refer to
page 667.
•
To configure monthly deployment, refer to
on page 667.
Available Targets list and click the right arrow button to move them to the Selected Targets list.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To configure security configuration schedule, refer to
configuration deployment"
list.
Where the minute value is from 00 through 59.
To configure security configuration schedule, refer to
configuration deployment"
"Configuring an hourly deployment schedule"
"Configuring a daily deployment schedule"
"Configuring a weekly deployment schedule"
"Configuring a monthly deployment schedule"
on page 665.
on page 665.
"Configuring a one-time deployment
step 11 of "Scheduling a security
step 11 of "Scheduling a security
Brocade Network Advisor SAN User Manual
on
on
on
53-1003154-01