Resource Monitoring Category; Fcip Monitoring Category - Brocade Communications Systems WFT-2D User Manual

33
MAPS monitoring categories
TABLE 115
Measure
Telnet violations (SEC_TELNET)
TS out of sync (SEC_TS)

Resource monitoring category

The Resource category monitors the system RAM, flash, CPU, and memory.
The Resource category uses monitors to perform the following tasks:
•
•
Table 116
TABLE 116
Measure
Temperature (TEMP)
Flash (FLASH_USAGE)
CPU
Memory (MEMORY_USAGE) Monitors the available memory by calculating the percentage of memory consumed

FCIP monitoring category

The FCIP category enables you to define rules for Fibre Channel over IP (FCIP) health, including
circuit state changes and utilization as well as packet loss.
Table 117
TABLE 117
Measure
FCIP circuit state changes (CIR_STATE)
FCIP circuit utilization (CIR_UTIL)
1342
Security measures (Continued)
Configure thresholds for MAPS event monitoring and reporting for the environment and
resource classes. Environment thresholds enable temperature monitoring, and resource
thresholds enable monitoring of flash memory.
Configure memory or CPU usage parameters on the switch or display memory or CPU usage.
Configuration options include setting usage thresholds which, if exceeded, trigger a set of
specified MAPS alerts. You can set up the system monitor to poll at certain intervals and
specify the number of retries required before MAPS takes action.
lists measures in the Resource category and describes what each measure indicates.
Resource measures
Description
Refers to the ambient temperature inside the switch, in degrees Celsius.
Temperature sensors monitor the switch in case the temperature rises to levels at
which damage to the switch might occur.
Monitors the compact flash space available by calculating the percentage of flash
space consumed and comparing it with the configured high threshold value.
Monitors the CPU available by calculating the percentage of CPU consumed and
comparing it with the configured threshold value.
and comparing it with the configured threshold value.
lists measures in the FCIP category and describes what each measure indicates.
FCIP measures
Description
Telnet violations that occur when a Telnet connection request reaches a
secure switch from an unauthorized IP address.
Time Server (TS) violations that occur when an out-of-synchronization error
has been detected.
Description
The state of the circuit has changed for one of the following reasons:
•
The circuit has gone offline.
•
The circuit has come online.
•
The circuit is faulty.
The percentage of utilization for the circuit at the time of the last poll.
Brocade Network Advisor SAN User Manual
53-1003154-01