Brocade Communications Systems WFT-2D User Manual page 501

5. Select Active Directory Schema from the Available standalone snap-ins list and click Add.
6. Click Close on the Add Standalone Snap-in dialog box.
7.
8. Right-click the Attributes folder (Console Root/Active Directory Schema/Attributes) and select
9. Create the NmAors attribute by completing the following steps.
10. Right-click the Attributes folder (Console Root/Active Directory Schema/Attributes) and select
11. Create the NmRoles attribute by completing the following steps.
12. Expand the Classes folder (Console Root/Active Directory Schema) and right-click user and
13. Click the Attributes tab.
14. Click the Add button.
15. Select NmAors and click OK.
16. Click the Add button on the user Properties dialog box.
17. Select NmRoles and click OK.
18. Click OK on the user Properties dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
If Active Directory Schema does not display the Available standalone snap-ins list, you must
configure it on the LDAP server (refer to
server" on page 450).
Click OK on the Add/Remove Snap-in dialog box.
New > Attribute.
The Create a New Attribute dialog box displays.
a. Enter NmAors in the Common Name field.
b. Enter NmAors in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
New > Attribute.
a. Enter NmRoles in the Common Name field.
b. Enter NmRoles in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
select Properties.
The user Properties dialog box displays.
The Select Schema Object dialog box displays.
LDAP server configuration
"Configuring the Active Directory Schema on the LDAP
11
449