Creating A Cluster - Brocade Communications Systems WFT-2D User Manual

Creating a cluster

1. From the KeySecure Management Console, select the Device tab, then select Device
FIGURE 298
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
3. Verify the cluster status is shown as Active.
Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
Configuration > Cluster.
The Cluster Configuration page displays. (Refer to
KeySecure Cluster Configuration page
The Cluster Configuration page refreshes; the new cluster information is listed in the Cluster
Members table. (Refer to
Figure
Figure 299.)
298.)
20
751