Adding An Option To The Tools Menu - Brocade Communications Systems WFT-2D User Manual

5. Click Edit.
6. Click OK to save your work and close the Setup Tools dialog box.

Adding an option to the Tools menu

You can add third-party tools to the Tools menu which enables you to launch tools directly from the
application.
To add a option to the tools menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Tools Menu tab.
FIGURE 175
3. Type a label for the option as you want it to appear on the Tools menu in the Menu Text field.
4. Select the application from the Tool list, or click Define if you want to specify a new tool.
5. (Optional) Enter parameters, such as a URL, in the Parameters field.
6. (Optional) Select a keyboard shortcut in the Keystroke list.
Brocade Network Advisor SAN User Manual
53-1003154-01
NOTE
You must click Edit before clicking OK; otherwise, your changes will be lost.
The Setup Tools dialog box displays.
The Tool Menu Items table displays all configured tools, including the tool name as it displays
on the Tools menu, parameters, and keystroke shortcuts
Setup Tools dialog box (Tools menu tab)
To specify a new tool, refer to
NOTE
You cannot assign the same keyboard shortcut to two different tools.
Adding an option to the Tools menu
"Adding a tool" on page 417.
(Figure 175).
10
419