32
Defining filters
Defining filters
The Define Filter dialog box, shown in
event category, and severity. You can define event filters on SAN products, IP products, or hosts.
Setting up basic event filtering
To set up basic event filtering on the selected events for a user, complete the following steps.
1. Select Server > Users.
2. Select a user in the Users list and click Edit.
3. Select the E-mail Notification Enable check box and click the Filter link.
4. Select which product type you are defining (SAN, IP, or Hosts) and click the appropriate tab.
5. Select the Events Description check box and enter a description of the event in the field.
1258
The Users dialog box displays.
The Edit User dialog box displays.
The Define Filter dialog box, shown in
FIGURE 536
Define Filter dialog box
Figure
536, allows you to define event filters by product,
Figure
536, displays.
Brocade Network Advisor SAN User Manual
53-1003154-01