8. Continue to advance through the Add Event Action dialog box. The Summary pane of the Edit
9. Review your entries and take one of the following actions:
Pseudo events
A pseudo event is a combination of different SNMP traps that you decide would constitute a single
event. For example, there are two separate SNMP traps for link up and link down occurrences. You
might decide that these two occurrences should be just one event.
Displaying pseudo event definitions
To display the properties of a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
2. To view additional information for a definition, select a definition from the list. Additional
Creating pseudo event definitions
To create a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
Brocade Network Advisor SAN User Manual
53-1003154-01
Event Action dialog box displays an overview of the e-mail configuration you are creating.
-
Click Finish to approve the configuration.
-
Click Previous to return to the Action Group - E-Mail Settings pane of the dialog box.
-
Click Cancel to cancel the operation.
The Pseudo Events dialog box, shown in
FIGURE 561
Pseudo Events dialog box
information displays in the Details of Selected Pseudo Event list at the bottom of the dialog
box.
The Pseudo Events dialog box, shown in
Figure
561, displays.
Figure
561, displays.
32
Pseudo events
1295