Exporting A Configuration Policy Manager Report - Brocade Communications Systems WFT-2D User Manual

31
Viewing a configuration policy manager report
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
6. Click Close on the Configuration Policy Manager dialog box.

Exporting a configuration policy manager report

1. Click Export.
2. Click Save.
3. Browse to the file location where you want to save the report and click Save.
4. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
1252
-
Matched Block — Name of the matched block.
-
Status — Whether the configurations matched (Passed) or did not match (Failed).
-
Failed Condition — Name of the failed condition.
-
Match/Not Match — Whether the configurations matched (Match) or did not
match (Not Match).
-
Condition Details — Details about the condition.
-
Remediation — Details how to correct the failure, if the condition fails.
Host Checks — Switch checks provide the following information for each selected check:
Name — Product name.

Status — Result of the check and reason for failure if known. Valid results include

Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Displays the Host name and status of the policy check for the following option:
Host — Check for at least Configured_Minimum_Value connections to attached fabrics

Host — Check for connections through two fabrics to each target LUN. This check

provides the following additional detail for this check:
-
LUN Serial # — LUN serial number.
-
Adaptor Port — Host adapter port number.
-
Fabric — Fabric name.
-
Storage Port — Storage port number.
window.
The File Download dialog box displays.
The Save dialog box displays.
window.
Brocade Network Advisor SAN User Manual
53-1003154-01