32
SNMP traps
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
To add a trap destination, complete the following steps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
2. Select the Enable trap forwarding check box.
3. Click Add in the Destinations area of the SNMP Trap Forwarding dialog box.
1264
FIGURE 539
SNMP Trap Forwarding dialog box
The SNMP Trap Forwarding dialog box, shown in
The Add Trap Destination dialog box, shown in
Figure
539, displays.
Figure
540, displays.
Brocade Network Advisor SAN User Manual
53-1003154-01