Supported Port Configurations For Each Feature - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

29
Flow Vision flows
TABLE 89
Frame type parameter
scsi2reserve
scsi3reserve
scsi2release
scsi3release
scsiresrel2
scsiresrel3
scsitur
scsicmdsts
scsigoodstatus
scsicheckstatus
scsiinquiry
scsiresvconflict
scsixferrdy

Supported port configurations for each feature

Table 90
parameters (ingress port and source device, egress port and destination device).
TABLE 90
Feature
Flow Monitor
Flow Generator
Flow Mirror
1.
Notes on supported configurations
1130
Supported frame type parameters (Continued)
Frames counted
Only SCSI 2 reserve command frames
Only SCSI 3 reserve command frames
Only SCSI 2 release command frames
Only SCSI 3 release command frames
Only SCSI 2 reserve-release command frames
Only SCSI 3 reserve-release command frames
Only SCSI test unit ready frames
Only SCSI command status frames
NOTE: This parameter is valid only for Flow Mirror. It implicitly assumes bidirectional flow
and looks for both SCSI command and status frames.
Only SCSI status frames with status marked as good (all 0s (zeros) in status byte)
Only SCSI status frames with check status (Check Condition, Busy, Reservation Conflict,
Task Full Set)
Only SCSI inquiry frames
Only SCSI status frames with reservation conflict set
Only SCSI FCP XFER_RDY (transfer ready) frames
lists the supported configurations for each Flow Vision feature using only the basic flow
Port configurations supported in Flow Vision
Platforms
16 Gbps-capable
1
Fibre Channel
Supported
(E_Ports, EX_Ports,
F_Ports, and
XISL_Ports)
Supported
(SIM-Ports only)
Supported (F_Ports and
F_Port trunks)
16 Gbps-capable platforms include the FC8-32E and FC8-48E blades.
If you are using at least one advanced parameter (LUN, frame type, or bidirectional), then
feature-specific rules apply. Refer to the individual Flow Vision features for specific details.
Neither ranges nor lists are supported for any parameter.
Switch Configuration Mode
8 Gbps-capable
Access Gateway
Fibre Channel
Supported
Supported
(E_Ports, EX_Ports,
(F_Ports only)
F_Ports, and
XISL_Ports)
Supported (Destination
Not Supported
SIM-Ports only)
Not Supported
Not Supported
Brocade Network Advisor SAN User Manual
Virtual Fabric
Supported
Supported
Supported
53-1003154-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents