Enhanced Group Management - Brocade Communications Systems WFT-2D User Manual

12

Enhanced group management

TABLE 48
Field/Component
Contact
Description
State
Status
Right and left arrow buttons
Selected Switches table
Switch Name
IP
WWN
Current Firmware Status
TABLE 49
Field/Component
Validation Settings table
Disable Destination Switch check box
TABLE 50
Field/Component
Summary table
Enhanced group management
Use Enhanced Group Management (EGM), a separate licensed feature, to control access to
specific features on Fabric OS devices. The features affected include the following:
•
•
•
498
Step 4. Select Destination Switches (Continued)
Step 5. Validation
Step 6. Summary
Firmware Download - enables you to perform group firmware download.
For specific instructions for firmware download, refer to
Security - enables you to perform Group Security Policy Replication.
For specific instructions for security, refer to
Configuration Management - enables you to perform Group Configuration Upload and
Replication.
For specific instructions for configuration management, refer to
baseline configuration" on page 490.
Description
The primary contact at the customer site.
A description of the customer site.
The port state, for example, online or offline.
The operational status of the port; for example, unknown or marginal.
Click to move the switches back and forth between the Available
Switches table and the Selected Switches table.
Lists the switches selected as the destination switches.
The name of the switch selected to be the destination switch.
The IP address of the switch selected to be the destination switch.
The world wide name of the switch selected to be the destination switch.
The status of the current firmware.
Description
The replication settings that have been configured in previous steps; for
example, the configuration type, source configuration, and destination
settings. Click Finish to approve the settings.
Select to disable the destination switch during replication.
Description
The replication settings that have been successfully applied to the
selected destination switches; for example, the configuration type,
source configuration, and destination settings. Click Close to close the
dialog box.
"Firmware management"
"Configuration file management"
Brocade Network Advisor SAN User Manual
on page 499.
on page 475.
"Tracking changes from the
53-1003154-01