Brocade Communications Systems WFT-2D User Manual page 644

15
Adapter port WWN virtualization
5. Enter a valid world wide name (WWN), with or without colons, for the Access Gateway node.
6. Enter a port or a port range using numbers or a hyphen (-). For example, you can enter a range
7.
8. Set the FAWWN type to one of the following map types:
9. Click OK to add the rows for this configuration to the Fabric Assigned WWN Configuration - AG
Deleting AG port FAWWNs
1. Select Configure > Fabric Assigned WWN.
2. Click the Attached AG Ports tab.
3. Select an online AG FAWWN row and click the Delete button.
Moving an AG port FAWWN across switches
The AG port FAWWN can be online or offline when moved across switches.
1. Select Configure > Fabric Assigned WWN.
2. Click the Attached AG Ports tab.
3. Right-click the WWN row you want to move, select the Copy Row option, and paste the contents
4. Select an online AG FAWWN row and click the Delete button.
5. Select a switch from the Switch list and click Add to launch the Add AG Fabric Assigned WWN
6. Using the information you copied to the text editor, configure the AG port FAWWN information
7.
592
Optionally, you can select an existing AG Node WWN from the list. The AG Node WWN box
includes all discovered AG Node WWNs that are connected to the selected switch.
as 1-6 or you can separate values with a comma; for example: 1, 2, 5, 7-10, 20.
Click the Enable button to enable the FAWWN.
•
Auto — If the switch port does not have an Auto FAWWN map type and the FAWWN feature
is not yet enabled on the port, a <To Be Generated> message displays.
•
User defined — If this option is selected, you must enter a valid world wide name, with or
without colons. The User defined text box cannot be empty.
Ports list.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
The AG FAWWN row is cleared from the Fabric Assigned WWN Configuration - AG Ports list.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
into a text editor.
Configuration dialog box.
to be moved to the selected switch.
Click OK.
The specified AG FAWWN row is added to the new switch.
Brocade Network Advisor SAN User Manual
53-1003154-01