Brocade Communications Systems WFT-2D User Manual page 1168

28
SAN connection utilization
2. Click Options to launch the Graph Options dialog box. Refer to
3. Select the Graph or Table option to display data in graphical or tabular format.
4. Select a time range relative to the present for the display of historical data from the For list.
5. (Historical graphs and monitors only) Select the Plot Min/Max check box to plot minimum and
6. (Historical graphs and monitors only) Select one of the following options from the Granularity
7.
8. (Real Time Graphs/Tables and Historical Graphs/Tables dialog boxes only) Click Save as
Configuring graph options
Use the following steps to configure graph options for real time performance graph display as well
as time series monitors on the Dashboard tab.
1. Click Options on the graph.
1116
•
-
page 1116 for instructions on using this dialog box.
The options are incremental from the last 30 minutes to the last 24 hours.
maximum values along with the average data point.
The range between the minimum and maximum values will be represented in a color band
surrounding the data points. The width of the color band indicates the variation during the time
period. Note that this option is not available if you select Minimum Interval granularity.
list to set the granularity of the data point to display on the graph:
•
5 minutes
•
30 minutes
•
2 hours
•
1 day
NOTE
The graph will not update dynamically if the granularity is 30 minutes, 2 hours, or 1 day. To
update, move from one granularity setting to another. The graph will update dynamically when
Minimum Interval is selected.
Select the Events check box to display advanced monitoring service (AMS) violation events
received during the chart time range.
Widget to create a performance monitor published widget on the active dashboard. For
instructions, refer to "Configuring a monitor from a performance graph"
The Graph Options dialog box displays, as shown in
"Configuring graph options"
on page 434.
Figure 491 on page 1117.
Brocade Network Advisor SAN User Manual
on
53-1003154-01