FIGURE 360
5. Select the group in which to add the switch, then click Next.
Brocade Network Advisor SAN User Manual
53-1003154-01
The dialog box contains the following information:
•
Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
•
Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to
page 764.
Add Switch to Existing Encryption Group dialog box
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to
Adding a switch to an encryption group
"Creating a new encryption group"
20
on
Figure
361.)
803