Enabling Maps On A Device - Brocade Communications Systems WFT-2D User Manual

Enabling MAPS on a device

You can enable MAPS on one or more devices at the same time. Enabling MAPS on a device
converts existing Fabric Watch thresholds to MAPS policies and the active thresholds currently
monitored by Fabric Watch will continue to be monitored through MAPS.
1. Select Monitor > Fabric Vision > MAPS > Enable.
2. Click the right arrow button to move the selected devices to the Selected Switches list.
3. Click OK on the Enable MAPS dialog box.
4. Click Yes on the confirmation message to commit the changes to the selected devices.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Enable MAPS dialog box displays
FIGURE 574
Enable MAPS dialog box
Select one or more devices on which you want to enable MAPS in the Available Switches list.
Remove switches from the Selected Switches list by selecting them and clicking the left arrow
button.
A confirmation message displays.
Monitoring and Alerting Policy Suite overview
(Figure 574).
33
1329