Brocade Communications Systems WFT-2D User Manual page 696

16
DCB performance
Generating a real-time performance graph from the IP tab
To generate a real-time performance graph for a Network OS or FOS DCB switch, complete the
following steps.
1. Click the IP tab.
2. Select a DCB port from the DCB Configuration dialog box, and select Real Time Graph from the
3. Click OK to close the DCB Configuration dialog and open the Performance dialog box.
FIGURE 247
For complete information about Real Time Performance Graphs, refer to
performance data"
644
Performance list.
A message displays, prompting you to close the DCB Configuration dialog box.
The Real Time Performance Graphs dialog box displays, as shown in
Real Time Performance Graphs dialog box - IP tab
on page 1074.
Figure 247.
"SAN real-time
Brocade Network Advisor SAN User Manual
53-1003154-01