Brocade Communications Systems WFT-2D User Manual page 1372

32
Event logs
To display event details from the Master Log, complete the following steps.
1. Right-click an entry in the Master Log.
2. Select Properties.
3. Review the information.
TABLE 107
Event Field
Probable Cause
Description
Count
Origin
Message ID
Port Name
First Event Server Time
Fabric Name
Product Address
Audit
Category
Last Event Product Time
Last Event Server Time
Severity
Source Name
Virtual Fabric ID
Contributor
Recommended Action
First Event Product Time
Operational Status
Module Name
Source Address
Acknowledged
4. Click Close to close the Event Properties dialog box.
1320
The Event Properties dialog box, shown in
Event Properties
Table 107, displays.
Description
The most likely reason the event occurred.
A description of the event.
Number of times this event occurred on the host.
The event's origin, for example, SNMP trap.
The message associated with the event.
The port name associated with the event.
The time the event occurred.
The VCS fabric name.
The IP address of the product on which the event occurred.
Information regarding the audit.
One of the following event categories, which are detailed in
on page 1443:
•
Product Event
•
Link Incident Event
•
Product Audit Event
•
Product Status Event
•
Security Event
•
User Action Event
•
Management Server Event
The day, date, and time the last event occurred on the product.
The day, date, and time the last event occurred on the server.
The event severity.
The source of the event.
The virtual fabric identifier.
The contributor to this event.
The recommended action to take to remedy the event.
The day, date, and time the first event occurred on the product.
The product's operational status.
The module associated with the event.
The IP address of the source.
Indicates whether the event has been acknowledged.
"Event Categories"
Brocade Network Advisor SAN User Manual
53-1003154-01