Enabling Backup - Brocade Communications Systems WFT-2D User Manual

15
Backup support

Enabling backup

Backup is enabled by default. However, if it has been disabled, complete the following steps to
enable the function.
1. Select Server > Options.
2. Select Server Backup in the Category list.
3. Select the Enable Backup check box.
4. Click Apply or OK.
Disabling backup
Backup is enabled by default. If you want to stop the backup process, you must disable backup. To
disable the backup function, complete the following steps.
1. Select Server > Options.
2. Select Server Backup in the Category list.
3. Clear the Enable Backup check box.
4. Click Apply or OK.
600
The Options dialog box displays.
The Options dialog box displays.
Brocade Network Advisor SAN User Manual
53-1003154-01