The Resolving Policy - Brocade Communications Systems WFT-2D User Manual

9. Click Finish to complete the pseudo event configuration.
Creating an event action with a pseudo event on the resolving policy
To create an event action with a pseudo event on the resolving policy, complete the following steps.
1. Select Monitor > Event Processing > Event Actions.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and select the Enabled check box to enable
4. Click Next to display the Events pane.
5. Select the Pseudo Events event type from the Show list.
6. Select the pseudo event you created and click Next.
7.
8. Click Next to advance to the Policy pane of the Add Event Action dialog box.
9. Define the frequency of the event's occurrence that would trigger the action.
10. Click Next to advance to the Action Group-Actions pane of the Add Event Action dialog box.
11. Select Apply as a Logging Policy to indicate whether or not you want the event occurrence to be
12. Click Next to advance to the Summary pane.
13. Click Finish.
For more information about adding an event action, refer to
page 1280.
Brocade Network Advisor SAN User Manual
53-1003154-01
Now, you must create a new event action definition using the Add Event Actions dialog box.
The Event Actions dialog box displays.
the event.
By default, the Events pane of the Add Event Action dialog box displays.
The available pseudo events display.
The Sources pane of the Add Event Action dialog box displays.
Select the source that you will use to monitor this event from the Selected Sources list.
The Policy pane of the Add Event Action dialog box displays.
•
Click the Take actions for the selected event when they occur button if you want to take
action for the selected events when they occur.
•
Click the Take actions for the selected events based on below criteria button if you want to
take action for the selected events based on specified criteria.
The Action Group-Actions pane of the Add Event Action dialog box displays.
logged in the Management application database:
•
Select Log to log the occurrence in the Management application database.
•
Select Drop to not log the occurrence in the Management application database.
Pseudo events
"Event action definitions"
32
on
1303