Brocade Communications Systems WFT-2D User Manual page 661

6. Click the right arrow button to add the map to the DCB Maps list.
7.
8. When you have finished the configuration, click OK to launch the Deploy to Products dialog
Configuring LLDP
To configure LLDP, complete the following steps.
1. Select Configure > DCB.
2. Select the switch to edit from the Product/Ports list and click Edit.
3. Click the LLDP-DCBX tab.
4. Select the Global Configuration LLDP profile in the LLDP Profiles list.
5. Click the left arrow button to edit.
6. Select the FCoE Application and FCoE Logical Link check boxes in the Advertise list to
Brocade Network Advisor SAN User Manual
53-1003154-01
If a DCB map exists with the same name, a validation dialog box launches and you are asked if
you want to overwrite the map.
Click OK.
box.
The DCB Configuration dialog box displays.
The Edit Switch dialog box displays.
The Edit Switch dialog box - LLDP-DCBX tab displays, as shown in
FIGURE 233
Edit Switch dialog box - LLDP-DCBX tab
advertise them on the network.
16
DCB configuration
Figure 233.
609