Brocade Communications Systems WFT-2D User Manual page 840

20
Creating a new encryption group
FIGURE 342
11. Click Next.
788
Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
After configuration of the encryption group is completed, the Management application sends
API commands to verify the switch configuration. See
results" on page 800 for more information.
The Next Steps dialog box displays. (Refer to
certificates for the encryption switch are displayed.
"Understanding configuration status
Figure 343.) Instructions for installing public key
Brocade Network Advisor SAN User Manual
53-1003154-01