Creating A Flow Monitor Flow Definition - Brocade Communications Systems WFT-2D User Manual

29
Flow Monitor
•
•

Creating a Flow Monitor flow definition

This procedure provides step-by-step instructions for configuring a Monitor flow definition. For more
specific example procedures, refer to
1. Select the object on which you want to configure a flow monitor from the Connectivity Map or
2. Select Monitor > Fabric Vision > Flow > Add.
1140
They cannot show statistics for SIM-ports.
They do not support learned flows.
Product List. Options include:
-
Switch port
-
Initiator port
-
Target port
-
Switch that supports Flow Vision
NOTE
You can also right-click on any of these objects in the Connectivity Map or Product List and
select Flow > Add.
The Add Flow Definition dialog box displays populated with criteria and flow identifiers (such as
source and destination identifiers) for the appropriate flow definition based on the selected
object. For example, if you selected a target port, the Add Flow Definition dialog box is
populated with the source device port identifier, ingress switch port identifier, monitor type,
and destination device (as an asterisk). An asterisk (*) denotes any selected device in the
same zone as the source device.
"Flow Monitor example procedures"
Brocade Network Advisor SAN User Manual
on page 1153".
53-1003154-01