Brocade Communications Systems WFT-2D User Manual page 378

7
User-defined performance monitors
•
326
Slow Start Status — The number of slow starts.

Current Compression Ratio — The current compression ratio for the FCIP tunnel.

-
IP
Errors — The number of errors.

Discards — The number of discarded frames.

Receive EOF — The number of end-of-frames received.

Underflow Errors — The number of underflow errors.

Overflow Errors — The number of overflow errors.

Alignment Errors — The number of alignment errors.

Runtime Errors — The number of run time errors.

Too Long Errors — The number of too long frame errors.


-
Wireless
Dropped Events — The number of dropped events.

MAC Errors — The number of MAC errors.

Back Packets Received — The number of bad packets received.

Tx Errors — The number of transmit errors.

Traffic flows
-
SCSI
Read Frame Count (frames) — The SCSI read command frame count as reported in the

last data point received for the flow.
Write Frame Count (frames) — The SCSI write command frame count as reported in

the last data point received for the flow.
Read Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last

data point received for the flow.
Write Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last

data point received for the flow.
Read Data (Bytes) — The SCSI read data in bytes as reported in the last data point

received for the flow.
Write Data (Bytes) — The SCSI read data in bytes as reported in the last data point

received for the flow.
Read Data Rate (Mbps) — The SCSI read frame in megabytes per second rate as

reported by the last data point.
Write Data Rate (Mbps) — The SCSI write frame rate in megabytes per second as

reported by the last data point.
-
Frame
Transmit Frame Count (frames) — The transmit frame count as reported in the last

data point received for the flow.
Receive Frame Count (frames) — The received frame count as reported in the last data

point received for the flow.
Transmit Frame Rate (f/s) — The transmit frame rate per second as reported in the

last data point received for the flow.
Receive Frame Rate (f/s) — The received frame rate per second as reported in the last

data point received for the flow.
Transmit Word Count (bytes) — The transmit word count in bytes as reported in the last

data point received for the flow.
Brocade Network Advisor SAN User Manual
53-1003154-01