Editing A Preconfigured Performance Monitor - Brocade Communications Systems WFT-2D User Manual

•
•
•
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Product CPU Utilization monitor
•
•

Editing a preconfigured performance monitor

You can customize the monitor to display data by a selected time frame as well as customize the
display options.
1. Click the edit icon (
2. Select the number of products to include in a selected measure by entering a number in the
3. Configure the monitor to show only values greater than or less than a specified value by
4. Configure threshold numbers and associated colors by completing the following steps.
Brocade Network Advisor SAN User Manual
53-1003154-01
Location — The location of the product.
Contact — A contact name for the product.
Refreshed — The time of the last update for the monitor.
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1411.
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to "Performance Data"
) on the monitor.
From the Performance tab of the Customize Dashboard dialog box, select the monitor you want
to edit and click Edit.
For Top N, Bottom N Monitors, N= field.
Valid values are from 1 through 25. The default is 10.
completing the following steps.
a. Select the Show values check box.
b. Select greater than or less than from the list.
c. Enter a value in the field.
You can define three threshold numbers in decreasing order and four threshold colors. The
default values are as follows: 90 and above displays red; 75 and above displays orange; 60
and above displays yellow; and all others display blue.
a. Select the check box.
b. Enter a number in the field.
c. Click the color square to launch the Color dialog box.
•
To pick a color from a swatch, select the Swatches tab. Select a color from the display.
•
To specify a color based on hue, saturation, and brightness, click the HSV tab. Specify
the hue (0 through 360 degrees), saturation (0 through 100%), value (0 through
100%), and transparency (0 through 100%).
Performance monitors
on page 323.
"Application menus"
on page 1067.
7
on
323