Performance Graph - Brocade Communications Systems WFT-2D User Manual

Configuring a traffic flows monitor from a performance graph
1. Configure the performance graph.
2. Click Save As Widget to create a monitor of the graph data for the dashboard.
3. Modify the title, if necessary, and click OK.
4. Click OK on the message.
5. From the dashboard, click the Customize Dashboard icon.
6. Click the Performance tab.
7.
8. Click OK on the Customize Dashboard dialog box.
Configuring a user-defined traffic flow performance monitor
For creating a user-defined dashboard, refer to "Creating a user-defined dashboard" on page 346
and perform the following steps to configure a user-defined port performance monitor.
1. Click the Customize Dashboard icon.
2. Click the Performance tab.
3. Click Add.
4. Select the type of monitor you are creating from the Monitor Type - Traffic Flows area:
Brocade Network Advisor SAN User Manual
53-1003154-01
To configure a traffic flows performance graph, refer to //link to flow vision//.
The Historical Chart Monitor - Date_Time dialog box displays (where Date_Time is the date and
time the monitor was created).
The new monitor is added to the Performance tab of the Customize Dashboard dialog box.
The Customize Dashboard dialog box displays.
The new performance monitor displays at the bottom of the Performance Monitors list.
Select the Display check box for the new monitor.
The Customize Dashboard dialog box displays.
The Add Performance Dashboard Monitor dialog box displays.
•
Top N — Select to monitor the top N (number) ports affected by the selected measure.
•
Bottom N — Select to monitor the bottom N (number) ports affected by the selected
measure.
•
Time Series — Select to monitor one or more measures for a range of time and specified
targets.
Traffic flow dashboard monitors
7
347