Bottom Port Utilization Percentage Monitor - Brocade Communications Systems WFT-2D User Manual

7
Performance monitors
Accessing additional data from the Top Port Utilization monitor
•
•

Bottom Port Utilization Percentage monitor

The Bottom Port Utilization Percentage monitor
percentages in a table.
FIGURE 137
The Top Port Utilization Percentage monitor includes the following data:
•
•
•
•
•
•
•
•
•
316
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1411.
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to "Performance Data"
Bottom Port Utilization Percentage monitor
Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
Port — The port affected by this monitor.
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
RX Port Utilization Percentage — The bottom receive port utilization percentages.
TX Port Utilization Percentage — The bottom transmit port utilization percentages.
Product — The product affected by this monitor.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number — The port number.
"Application menus"
on page 1067.
(Figure 137) displays the bottom port utilization
Brocade Network Advisor SAN User Manual
on
53-1003154-01