Configuring a user-defined product performance monitor
For creating a user-defined dashboard, refer to
and perform the following steps to configure a user-defined product performance monitor.
1. Click the Customize Dashboard icon.
2. Click the Performance tab.
3. Click Add.
4. Enter a unique title for the monitor.
5. Select the type of monitor you are creating from the Monitor Type - Products area:
6. Select the product measure for the monitor in the Measure area:
7.
8. (Top N, Bottom N, and Distribution monitors only) Configure the monitor to show only values
Brocade Network Advisor SAN User Manual
53-1003154-01
The Customize Dashboard dialog box displays.
The Add Performance Dashboard Monitor dialog box displays.
The title can be up to 256 characters in length.
•
Top N — Select to monitor the top N (number) products affected by the selected measure.
•
Bottom N — Select to monitor the bottom N (number) products affected by the selected
measure.
•
Distribution — Select to monitor the selected measure for five defined distribution
percentages.
•
Time Series — Select to monitor a selected measure for a range of time and specified
target.
•
Memory Utilization Percentage
•
CPU Utilization Percentage
•
Temperature
•
Fan Speed
•
Response Time
•
System Up Time
•
Ports Not In Use
•
Ping Packet Loss Percentage
•
AP Client Count (not available for Time Series monitors)
(Top N and Bottom N monitors only) Select the number products to include in a selected
measure by entering a number in the For Top N, Bottom N Monitors, N= field.
Valid values are from 1 through 25. The default is 10.
greater than or less than a specified value by completing the following steps.
a. Select the Show values check box.
b. Select greater than or less than from the list.
c.
Enter a value in the field.
User-defined performance monitors
"Creating a user-defined dashboard"
7
on page 269
333