User-Defined Performance Monitors; Monitor Types - Brocade Communications Systems WFT-2D User Manual

7

User-defined performance monitors

5. Click OK to save your changes.
User-defined performance monitors
You can customize performance monitors specific to your needs. You can define up to 100
performance monitors; however, you can only display up to 30 performance monitors at a time.

Monitor types

You can create the following types of monitors:
•
•
•
•
•
Measures
Depending on the object (products, ports, traffic) you want to monitor, you can choose from the
following measures:
•
324
•
To specify a color based on hue, saturation, and lightness, click the HSL tab. Specify
the hue (0 through 360 degrees), saturation (0 through 100%), lightness (0 through
100%), and transparency (0 through 100%).
•
To specify a color based on values of red, green, and blue, click the RGB tab. Specify
the values for red (0 through 255), green (0 through 255), blue (0 through 255), and
alpha (0 through 255).
•
To specify a color based on values of cyan, magenta, yellow, and black, click the CMYK
tab. Specify the values for cyan (0 through 255), magenta (0 through 255), yellow (0
through 255), black (0 through 255), and alpha (0 through 255).
•
To reset to the default color, click Reset.
Top N (Products, Ports, and Traffic Flows monitors) — Displays the top number of products,
ports, or traffic flows for the selected measure in a table.
Bottom N (Products, Ports, and Traffic Flows monitors) Displays the bottom number of
products, ports, or traffic flows for the selected measure in a table.
Distribution (Products and Ports monitors) — Displays the number (distribution) of products or
ports for each of the five percentage ranges defined for the selected measure in a bar graph
Time Series (Products, Ports, and Traffic Flows monitors) — Displays the selected measures for
products, ports, or traffic flows in a chart.
Performance graph — Displays the configured performance graph on the dashboard.
Product
-
Memory Utilization Percentage — The memory utilization percentage for the product.
-
CPU Utilization Percentage — The CPU utilization percentage for the product.
-
Temperature — The temperature in Celsius for the product.
-
Fan Speed — The fan speed in RPM for the product.
-
Response Time — The response time in seconds for the product.
-
System Up Time — The system up time in days for the product.
-
Ports Not In Use — The number of ports not in use for the product.
Brocade Network Advisor SAN User Manual
53-1003154-01