Top Or Bottom Port Performance Monitors - Brocade Communications Systems WFT-2D User Manual

7
User-defined performance monitors
•
•
•
•
•
•
•
•
•
•
•
•
•
To configure a product performance monitor, refer to
performance monitor"
Accessing additional data from top or bottom product monitors
In a Top N or Bottom N monitor, double-click a row or right-click a row and select Show Graph/Table
to navigate to the Historical Graphs/Tables dialog box for the selected measures. For more
information, refer to

Top or bottom port performance monitors

The top or bottom port performance monitors
ports (for example, bottom 10 ports) for the selected measure in a table.
FIGURE 144
328
Max — The maximum value of the measure in the specified time range.
Fabric — The fabric to which the device belongs.
Product Type — The type of product (for example, switch).
State — The product state (for example, Offline).
Status — The product status (for example, Reachable).
Tag — The product tag.
Serial # — The serial number of the product.
Model — The product model.
Port Count — The number of ports on the product.
Firmware — The firmware level running on the product.
Location — The location of the product.
Contact — A contact name for the product.
Refreshed — The time of the last update for the monitor.
on page 333.
"Performance Data"
Top or bottom port performance monitor example
"Configuring a user-defined product
on page 1067.
(Figure 144) display the top or bottom number of
Brocade Network Advisor SAN User Manual
53-1003154-01