Ip Verify Binding; Show Ip Verify Interface - Dell Networking 7048 Reference Manual

ip verify binding

Use the ip verify binding command in Global Configuration mode to
configure static bindings. Use the no form of the command to remove the
IPSG entry.
Syntax
macaddr vlan ipaddr interface
ip verify binding
Default Configuration
By default, there will not be any static bindings configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip verify binding 00:11:22:33:44:55
vlan 1 1.2.3.4 interface gigabitethernet 1/0/2

show ip verify interface

Use the show ip verify interface command in Privileged EXEC mode to
display the IPSG interface configuration.
Syntax
show ip verify interface
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
565
IP Source Guard Commands