Ethernet Cfm Cc Level - Dell Networking 7048 Reference Manual

Command Mode
Maintenance domain config mode
User Guidelines
This command has no user guidelines.
Example
console(config-cfm-mdomain)#service serv1 vlan 10

ethernet cfm cc level

Use the ethernet cfm cc level command in Global Configuration mode to
initiate sending continuity checks (CCMs) at the specified interval and level
on a VLAN monitored by an existing domain. Use the no form of the
command to cease send CCMs.
Syntax
ethernet cfm cc level
Parameter Description
Parameter
Maintenance
association
VLAN ID
CCM Interval
448
Ethernet CFM Commands
0-7 vlan-list
vlan
Description Range
VLAN ID 1-4093
representing a
service instance
that is
monitored by
this
maintenance
association.
Time interval 1, 10, 60, and 600
between seconds
successive
transmissions
of CCM.
secs
interval
Default
0
1 second
Access
Read-write
Read-write