Interface Range - Dell Networking 7048 Reference Manual

interface range

Use the interface range command in Global Configuration mode to execute a
command on multiple ports at the same time.
NOTE:
An additional form of this command enables configuring a range of VLANs.
See interface range
Syntax
interface range {
Parameter
port-range
port-type
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration, Interface Range and Interface modes
User Guidelines
Commands under the interface range context are executed independently on
each active interface in the range. If the command returns an error on one of
the active interfaces, it does not stop executing commands on other active
interfaces.
Example
The following example shows how gigabitethernet ports 5/0/18 to 5/0/20 and
3/0/1 to 3/0/24 are ranged to receive the same command.
console(config)# interface range gigabitethernet 5/0/18-
20,3/0/1-24
vlan.
port-rang port-type
e |
Description
A list of valid ports to configure. Separate non-consecutive
ports with a comma and no spaces; use a hyphen to designate a
range of ports. For more detailed information, see
Multiple Objects
to the maximum number of command line characters possible
in the port-range parameter.
Shows all interfaces of the specified type.
all}
(Range). The command line buffer parses up
Ethernet Configuration Commands
Operating on
417