Show Gvrp Error-Statistics - Dell Networking 7048 Reference Manual

show gvrp error-statistics

Use the show gvrp error-statistics command in User EXEC mode to display
GVRP error statistics.
Syntax
port-
show gvrp error-statistics [{gigabitethernet unit/slot/port| port-channel
channel-number | tengigabitethernet unit/slot/port }]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays GVRP error statistics information.
console>show gvrp error-statistics
GVRP error statistics:
----------------
Legend:
INVPROT: Invalid Protocol Id INVATYP: Invalid Attribute
Type
INVALEN: Invalid Attribute Length INVAVAL: Invalid Attribute
Value
INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
486
GVRP Commands