Show Switchport Protected - Dell Networking 7048 Reference Manual

show switchport protected

Use the show switchport protected command in Privileged EXEC mode to
display the status of all the interfaces, including protected and unprotected
interfaces.
Syntax
show switchport protected
groupid — Identifies which group the port is to be protected in.
•
(Range: 0–2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
Name......................................... test
444
Ethernet Configuration Commands
groupid