Show Arp Access-List; Show Ip Arp Inspection - Dell Networking 7048 Reference Manual

show arp access-list

Use the show arp access-list command to display the configured ARP ACLs
with the rules. Giving an ARP ACL name as the argument would display only
the rules in that ARP ACL.
Syntax
show arp access-list [
acl-name
— A valid ARP ACL name (Range: 1–31 characters).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08

show ip arp inspection

Use the show ip arp inspection command in Privileged EXEC mode to
display the Dynamic ARP Inspection and status.
390
Dynamic ARP Inspection Commands
acl-name
]