Spanning-Tree Auto-Portfast - Dell Networking 7048 Reference Manual

no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables spanning-tree functionality.
console(config)#spanning-tree

spanning-tree auto-portfast

Use the spanning-tree auto-portfast command to set the port to auto portfast
mode. This enables the port to become a portfast port if it does not see any
BPDUs for 3 seconds. Use the no form of this command to disable auto
portfast mode.
Syntax
spanning-tree auto-portfast
no spanning-tree auto-portfast
Default Configuration
Auto portfast mode is enabled by default.
Command Mode
Interface Configuration (Ethernet, Port Channel) mode
Usage Guidelines
There are no user guidelines for this command.
765
Spanning Tree Commands