Police-Two-Rate - Dell Networking 7048 Reference Manual

console(config-policy-classmap)#police-simple 1000 64
conform-action transmit violate-action drop

police-two-rate

Use the police-two-rate command to implement a two-rate Three Color
Market (trTCM) per RFC 2698. A trTCM meters a traffic stream and colors
packets according to four parameters:
Committed Information Rate (CIR)
Committed Burst Size (CBS)
Peak Information Rate (PIR)
Peak Burst Size (PBS)
A packet is colored red if it exceeds the PIR, yellow if it exceeds the CIR, and
green if it does not exceed either. A trTCM is useful when a peak rate needs to
be enforced separately from a committed rate.
Syntax
datarate burstsize peak-data-rate excess-burstsize
police-two-rate
action
action exceed-action
datarate — Data rate in kilobits per second (kbps). (Range:
•
1–4294967295)
burstsize — Burst size in Kbytes (Range: 1–128)
•
peak-data-rate
•
4294967295)
excess-burstsize — Excess burst size in kilobits per seconds (kbps). (Range
•
1-128)
action — The action to take according to the color. Select one of:
•
– drop— Drop the packet.
– set-prec-transmit
ip-prec and transmit. (Range 0-7)
– set-dscp-transmit
val and transmit. (Range 0-63)
– set-cos-transmit
packet to
action
violate-action
— Peak data rate in kilobits per second (kbps). (Range 1-
ip-prec — Remark the IP precedence in the packet to
dscp-val — Remark the DSCP in the packet to dscp-
802.1p-priority — Remark the 802.1p priority in the
802.1p-priority and transmit. (Range 0-7)
conform-
action
QoS Commands
695