Dell Networking 7048 Reference Manual page 771

Default Configuration
Neither root nor loop guard is enabled.
Command Mode
Interface Configuration (Ethernet, Port Channel) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example disables spanning-tree guard functionality on gigabit
ethernet interface 4/0/1.
console#config
console(config)#interface gigabitethernet 4/0/1
console(config-if-4/0/1)#spanning-tree guard none
spanning-tree loopguard
Use the spanning-tree loopguard command to enable loop guard on all ports.
Use the "no" form of this command to disable loop guard on all ports.
Syntax
spanning-tree loopguard default
no spanning-tree loopguard default
Default Configuration
Loop guard is disabled by default.
Command Mode
Global Configuration mode
Usage Guidelines
There are no usage guidelines for this command.
771
Spanning Tree Commands